3 Pack 48 LED Wireless Adjust Brightness 3 Color Night Light

【Easy Installation and Portable】The light has a built-in magnet, which can be adsorbed on any iron surface. You can also use double-sided tape and iron sheet to attach the light to any place. Portable, you can remove the light from the magnet to anywhere for lighting.
【USB Rechargeable and Save electricity】Every light has 48 super bright beads.Every light is powered by 1500mah rechargeable battery(included).Charging through usb data cable, you can charge through portable charger, computer USB port.
【Motion sensor light】the light will turn on automatically if it senses people passing by within 10ft/120°.In motion sensor condition, it will turn off automatically after 20s of no movement .
【Three level working modes】ON-OFF-G(AUTO) , G(AUTO) is the light will turn on automatically if it senses human motion in dark conditions and night. ON :always keep on.OFF:be off.

【Adjust Brightness】It has a SETUP key,press the SETUP button once to choose one color,long press the button ,the brightness can be adjusted as need.
【Multi-purpose】Cabinets, farmhouses, shoe cabinets, RVs,warehouses, closets, and of course portable, can serve as lighting .

1. Side luminous: the LED lamp emits light on the side, the light is brighter and soft but not glare.
2. In the low light environment, the sensor light turns on automatically if people passing by have been sensed under "G" mode, and extinguishes automatically 20 seconds after no movement.
3. Wireless, with built-in magnets and lithium battery, USB rechargeable.
4. Ultra-thin, smooth, and light appearance design with intelligent lighting function, saves more space for you.

 

Tips:

* Do not install the magnetic motion activated light in a place with rain or heavy humidity.

* Please do not install 2 cabinet lights too close to each other, because they will influence the light's motion sensitivity reciprocally.

* If the motion sensor under cabinet light is idle for a long time, please charge it at least every three months for the sake of longer battery service life.

* The operating temperature range for induction light is 23°F to 80°F. If the temperature exceeds this range, it will affect the induction sensitivity and easily damage the battery.

* The sensing part is a small spherical lens located at the end of the light. When installing, please put the sensor in a position facing the direction you walk towards, so that the movement can be fully detected.