ABRO SS822 reinforced radiator sealant LIQUID with COPPER 240 ml

ABRO SS822
reinforced radiator sealant LIQUID with COPPER 240 ml

Modified water glass reinforced with pure copper for cold welding of engine holes and cracks. For gasoline and diesel engines with and without turbocharging, as well as for engines running on liquefied gas.

Mode of application:

1. Drain the coolant and fill with water. The engine should idle until it warms up to operating temperature.
2. Shake the sealant thoroughly and pour it into the radiator.
3. Close the radiator cap and let the engine idle for 15 minutes or until the leak stops.
4. Drain the water with sealant from the cooling system and fill in antifreeze or antifreeze to the required level. Never fill the radiator when the water level is low.