AMSOIL Engine and Transmission Flush 473ml

Additive for flushing the engine and transmission before changing the oil

AMSOIL Engine and Transmission Flush 473ml

Flushing the oil system of the engine and transmission is used for preventive flushing during normal driving without traffic jams and increased loads at a standard oil change interval. With the help of a reinforced additive package, it effectively dissolves deposits and complex contaminants without clogging the oil receiver, channels and ducts of the oil system. Suitable for both petrol and diesel engines.

AMSOIL Engine and Transmission Flush (FLSH) helps restore fuel economy, improves unit performance and reduces exhaust emissions in diesel and gasoline engines, and is also applied to transmissions. The strong detergent formula of the drug allows you to clean the formation of sludge and deposits, reduces oil consumption. AMSOIL Engine and Transmission Flush is safe for engine and transmission components and can be easily removed with used oil.
Restoring engine capabilities ("like new")
New engines and transmissions are always more efficient. are free from harmful deposits, which during the operation of the unit reduce its efficiency. Start-stop, idle, short trips that do not allow the engine to reach full operating temperature, towing, fuel dilution, condensation, and oil oxidation can all contribute to the development of sludge in engine oil and transmission fluid. Sludge clogs narrow oil passages, restricting oil flow to vital engine or transmission components, especially the valve top.
In gears, deposits can cause the clutch disc to seize, causing vibration and noise. Ultimately, varnish can form on the engine cylinder walls, shortening the life of the gearbox. Deposits in the engine and transmission increase wear, causing loss of power and increased fuel consumption.
Used in engines and gearboxes before oil change
Removes deposits and sludge, improves fuel economy and reduces exhaust emissions
Extends the service life of equipment
Has no harmful effect on the environment
Neutral to sealing materials
Excellent result
Easily disposed of with used oil

Benefits of AMSOIL Engine and Transmission Flush
Unlike other flush additives, AMSOIL Engine and Transmission Flush is a versatile formula that removes carbon, varnish and sludge from both the engine and transmission. Thanks to the detergent formula, it is easy to remove with used oil, which is convenient to use. An advanced formula based on a light base oil, the presence of detergents and dispersants provide a safe cleansing action. AMSOIL Engine and Transmission Flush is compatible with mineral and synthetic oils and is filled into the engine or transmission prior to an oil change. This flush is the first step in restoring high performance equipment. AMSOIL Engine and Transmission Flush has the following benefits:
Gasoline and diesel engines
eliminates sticking of valves and rings, minimizes gas breakthrough and reduces emissions
helps reduce noise
contributes to improved performance at low temperatures due to the reduction of carbon deposits
simple removal
Automatic transmissions
removes deposits in the oil cooler and channels
helps improve fluid permeability
removes sludge and varnish deposits from clutch discs, improves performance
Provides smooth shifting and extends transmission life

Application
AMSOIL Engine and Transmission Flush is recommended for gasoline and diesel engines and automatic transmissions. Not recommended for CVT or differentials.

Directions for use
AMSOIL Engine and Transmission Flush can be applied at every oil change. When using a washer, follow the equipment manufacturer's recommendations. Otherwise, follow these guidelines:

Engine: Add 1 bottle (473 ml capacity) AMSOIL Engine and Transmission Flush to the oil tank. Let the engine idle for 10-15 minutes, then drain the oil immediately. Make sure everything is drained from the system. Remove and replace the oil filter. Fill the engine with new oil of the correct viscosity and recommended by the manufacturer.

Transmission: apply the parking brake. Add 1 vial (473 ml) of AMSOIL Engine and Transmission Flush to the oil tank. Let it idle for 10-15 minutes; move the shift lever to the drive position (D) and to the reverse position (R). DO NOT give high loads. Drain all fluid from the transmission and torque converter. The filter must be replaced before filling with new gear oil.