Bunny Face Embroidery Design

Bunny Face Embroidery Design

Bunny Face Embroidery Design Face Machine Embroidery Design Rabbit Face Embroidery design Animal
Face embroidery design cat embroidery #120

This design comes with 21 sizes (width) : 

2.00”  x 1.44” 3722 st

2.23”  x 1.61” 4228 st

2.48”  x 1.79” 4933 st

2.73”  x 1.96” 5551 st

2.98”  x 2.14” 6226 st

3.23”  x 2.32” 6988 st

3.48”  x 2.50” 7803 st

3.73”  x 2.67” 8677 st

3.98”  x 2.85” 9573 st

4.23”  x 3.02” 10390 st

4.48”  x 3.20” 11262 st

4.73”  x 3.38” 12247 st

4.98”  x 3.56” 13221 st

5.23”  x 3.74” 14115 st

5.48”  x 3.91” 15331 st

5.73”  x 4.09” 16415 st

5.98”  x 4.27” 17598 st

6.23”  x 4.44” 18623 st

6.48”  x 4.62” 19912 st

6.73”  x 4.80” 21216 st

6.98”  x 4.98” 22477 st

The following 9 formats are included in the file you will receive:

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

*VP3 - (Husqvarna,Viking)

*VIP

 

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

*************************************************************************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item. *************************************************************************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well