Butterfly Free Standing Lace
Butterfly Free Standing Lace
This design comes with 8 sizes:
3.40” x 2.34” 10810 st
3.65” x 2.50” 11766 st
4.01” x 2.76” 13165 st
4.38” x 3.01” 14689 st
4.74” x 3.25” 16301 st
5.10” x 3.50” 18063 st
5.47” x 3.76” 19797 st
5.83” x 4.01” 21585 st
The following 9 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
*VP3 - (Husqvarna,Viking)
*VIP
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an
embroidery machine to stitch these designs out.
*************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to
the machine to use this file. This listing is for the machine file only - not a finished item.
*************************************************************************************
Used with water soluble stabilizer.
Freestanding lace! Adorable design is stitched onto a wash away stabilizer
When sewing out FSL use the same color bobbin thread as the top thread. For free standing lace hoop
one or two layers of fiber water soluble stabilizers making sure it’s taut in the hoop and embroider the
design onto the stabilizer. No fabric - just stabilizer!
Keep it in the water bath for about 10 minutes then remove it from the warm water and place the
design onto a dry flat surface until the thread has thoroughly dried.