Ceiling Corner Bass Trap Triangle-TRI Acoustic Foam with Perforated Laminated HDF Plate | 42x42x42cm | Triangular

Introducing "Triangle-TRI," a triangular high-performance corner bass trap designed to seamlessly integrate into the interior of most rooms without disrupting the natural decor.

Bass traps are effective at capturing the random 'omni-directional' bass energy that tends to accumulate in corners, preventing it from overwhelming the room. By reducing smear and enhancing bass definition and punch, these traps enable better control of low-frequency energy, assisting studios in achieving a tighter, more controlled bass output.

Acoustic engineers consistently prioritize addressing corner areas in room acoustics due to their role in sound distribution. "Triangle-TRI" traps effectively eliminate standing waves, flutter echoes, unwanted reflections, and room ring, making them ideal for various audio or acoustic applications.

Placing "Triangle-TRI" traps in room corners significantly reduces the natural reverberation time, particularly noticeable in the attenuation of low-frequency resonances. Even if there are no other sound-absorbing surfaces in the room, these bass traps can significantly improve sound characteristics in the lower frequency spectrum.

Experience enhanced audio quality and refined acoustics with "Triangle-TRI" bass traps, seamlessly integrating functionality with aesthetic appeal.

Specifications:
• Functionality: Combination of Absorption and Diffusion
• Absorption Frequency: Primarily Medium Frequencies
• Material: Perforated Laminated HDF and Foam (Type M1)
• Dimensions: 16.55x16.55x16.55 inches / 420x420x420 mm
• Density: 1.8 lb/ft3 (30 kg/m3)
• Noise Reduction Coefficient (NRC) range: Approximately 0.62
• Permanent Deformation: Up to 3.6% (After 22 hours, 50% compression at 158 °F)
• Tensile Strength: Starting from 90 kPa
• Minimum Elongation at Break: 120%
• Temperature Resistance: Approximately 122 °F
• CIELAB Chromatic Error Range: Delta E ≤ 5

Installation:
The installation process involves using continuous sheets of "Double Sided Adhesive Tape" or glue applied onto an acrylic base.