Heart Eyes Emoji applique design

Heart Eyes Emoji applique design

Heart Eyes Emoji applique design Heart Emoji Applique Design Love Emoji applique design Love Smile Emoji machine embroidery #143

This design comes with 10 sizes:

1.51” x 1.51” 1663 st

2.02” x 2.02” 2256 st

2.50” x 2.51” 2964 st

3.02” x 3.02” 3936 st

3.51” x 3.51” 4793 st

4.02” x 4.02” 6007 st

4.51” x 4.51” 7151 st

5.02” x 5.02” 8475 st

5.51” x 5.51” 9837 st

6.02” x 6.02” 11286 st

The following 8 formats are included in the file you will receive:

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

* VP3 - (Husqvarna,Viking)

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

*****************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.

******************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.