Jewelry Set FSL Embroidery Design

Jewelry set fsl Embroidery design bracelet FSL earrings FSL Jewelry Machine Embroidery Tatting FSL
Bracelet lace tatting jewelry pattern #260

5.83” x 1.80” 17797 st
1.69” x 3.17” 8474 st

The following 9 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
*VP3 - (Husqvarna,Viking)
*VIP

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an
embroidery machine to stitch these designs out.
*************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to
the machine to use this file. This listing is for the machine file only - not a finished item.
*************************************************************************************
Used with water soluble stabilizer.
Freestanding lace! Adorable design is stitched onto a wash away stabilizer
When sewing out FSL use the same color bobbin thread as the top thread. For free standing lace hoop
one or two layers of fiber water soluble stabilizers making sure it’s taut in the hoop and embroider the
design onto the stabilizer. No fabric - just stabilizer!
Keep it in the water bath for about 10 minutes then remove it from the warm water and place the
design onto a dry flat surface until the thread has thoroughly dried.