METALLIC RADIATOR & BLOCK SEAL HG9037 / 325 ml HI-GEAR

METALLIC RADIATOR & BLOCK SEAL  HG9037 / 325 ml HI-GEAR

Only added to water! The composition is not used with antifreeze! Guaranteed to eliminate leaks of antifreeze (antifreeze).

PURPOSE: For repair of elements of the cooling system: gaskets, radiators, cylinder heads and blocks.

ACTION: Repairs cracked heads and blocks with welding strength. Reliably eliminates strong coolant leaks from radiators, heat exchangers, heater taps. Withstands vibration and temperature changes. Does not wash out or dissolve. Polymerizes only when flowing out of the leak.

COMPATIBILITY: Safe for all types of cooling systems. Used with water only. After restoring the tightness and draining the water, any coolant can be used.

APPLICATION:

Stop and cool the engine.
Fully open the heater valve, if it is provided for by the design.
Drain any existing coolant from the system.
Flush the cooling system with water twice, warming up the engine to operating temperature each time. A heavily contaminated system must first be flushed with HG9014 or HG9017.
Mix the contents of the jar with 2.5 liters of water. Pour into the system and bring the fluid level to normal.
Start the engine and let it idle at medium speed until the leak stops (approximately 20 minutes).
Stop, cool the engine and drain the fluid.
Without closing the radiator caps, the expansion tank and without tightening the drain plugs, let the cooling system dry for 2 to 4 hours (at least 3 hours).
After filling with antifreeze, the car can be operated normally.
The packaging is designed for a cooling system up to 17 liters.