North Star machine embroidery design
North Star embroidery
The North Star adds a magical celestial accent to any fabric! Try this unique embroidery on your clothes, home decor, bedsheets, pajamas, curtains, towels, or anything else. This machine embroidery design comes with multiple embroidery file formats and can be used with multiple embroidery machines
This design comes with 25 sizes
0.74” X 1.00” (18.8mm X 25.4mm) 505 st
0.93” X 1.23” (23.6mm X 31.2mm) 678 st
1.12” X 1.47” (28.4mm X 37.4mm) 816 st
1.24” X 1.72” (31.4mm X 43.8mm) 1039 st
1.45” X 1.97” (36.8mm X 50.0mm) 1209 st
1.71” X 2.23” (43.4mm X 56.6mm) 1403 st
1.83” X 2.47” (46.4mm X 62.8mm) 1657 st
2.03” X 2.72” (51.6mm X 69.2mm) 1887 st
2.20” X 2.97” (56.0mm X 75.4mm) 2125 st
2.41” X 3.23” (61.2mm X 82.0mm) 2422 st
2.59” X 3.47” (65.8mm X 88.2mm) 2688 st
2.83” X 3.72” (72.0mm X 94.6mm) 2947 st
3.01” X 3.97” (76.4mm X 100.8mm) 3311 st
3.17” X 4.23” (80.4mm X 107.4mm) 3615 st
3.39” X 4.47” (86.0mm X 113.6mm) 3950 st
3.58” X 4.72” (91.0mm X 120.0mm) 4246 st
3.77” X 4.97” (95.8mm X 126.2mm) 4644 st
3.94” X 5.23” (100.0mm X 132.8mm) 5053 st
4.17” X 5.47” (106.0mm X 139.0mm) 5383 st
4.29” X 5.72” (109.0mm X 145.4mm) 5829 st
4.48” X 5.97” (113.8m X 151.6mm) 6231 st
4.73” X 6.23” (120.2mm X 158.2mm) 6611 st
4.87” X 6.47” (123.8mm X 164.4mm) 7136 st
5.03” X 6.72” (127.8mm X 170.8mm) 7568 st
5.24” X 6.97” (133.2mm X 177.0mm) 8009 st
The following 8 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
* VP3 - (Husqvarna,Viking)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.
************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.