Skeleton Middle Finger machine Embroidery Design Fuck Finger Embroidery Design Middle finger embroidery design Middle finger embroidery #129

*********
This design comes with 22 sizes:
1.04” x 1.98” (26.3 mm x 50.4 mm) 2438 st
1.17” x 2.23” (29.6 mm x 56.6 mm) 2848 st
1.30” x 2.49” (33.0 mm x 63.2 mm) 3218 st
1.42” x 2.73” (36.0 mm x 69.4 mm) 3629 st
1.55” x 2.98” (39.4 mm x 75.8 mm) 4032 st
1.68” x 3.23” (42.6 mm x 82.0 mm) 4521 st
1.80” x 3.48” (45.8 mm x 88.4 mm) 5008 st
1.93” x 3.73” (49.0 mm x 94.8 mm) 5489 st
2.06” x 3.98” (52.4 mm x 101.1 mm) 5992 st
2.19” x 4.24” (55.6 mm x 107.6 mm) 6553 st
2.31” x 4.48” (58.8 mm x 113.8 mm) 7062 st
2.45” x 4.73” (62.2 mm x 120.2 mm) 7549 st
2.57” x 4.98” (65.4 mm x 126.5 mm) 8168 st
2.70” x 5.24” (68.6 mm x 133.0 mm) 8805 st
2.83” x 5.48” (71.8 mm x 139.2 mm) 9398 st
2.95” x 5.73” (75.0 mm x 145.6 mm) 10037 st
3.09” x 5.98” (78.4 mm x 152.0 mm) 10646 st
3.21” x 6.24” (81.6 mm x 158.4 mm) 13373 st
3.34” x 6.48” (84.8 mm x 164.6 mm) 11975 st
3.46” x 6.73” (88.0 mm x 171.0 mm) 12726 st
3.60” x 6.98” (91.4 mm x 177.3 mm) 13579 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)


Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************

For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.


In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.