Skeleton Middle Finger machine Embroidery Design Fuck Finger Embroidery Design Middle finger embroidery design Middle finger embroidery #173
*********
This design comes with 25 sizes:
3.91” x 3.45” (99.4 mm x 87.6 mm) 14602 st
4.25” x 3.76” (108.0 mm x 95.4 mm) 16109 st
4.50” x 3.96” (114.2 mm x 100.6 mm) 17292 st
4.75” x 4.19” (120.6 mm x 106.4 mm) 18426 st
5.00” x 4.41” (126.9 mm x 112.0 mm) 19688 st
5.24” x 4.63” (133.2 mm x 117.6 mm) 20921 st
5.50” x 4.84” (139.6 mm x 123.0 mm) 22272 st
5.75” x 5.07” (146.0 mm x 128.8 mm) 23664 st
6.00” x 5.29” (152.4 mm x 134.4 mm) 24888 st
6.24” x 5.51” (158.6 mm x 140.0 mm) 26424 st
6.50” x 5.73” (165.2 mm x 145.6 mm) 27786 st
6.75” x 5.94” (171.4 mm x 151.0 mm) 29056 st
6.99” x 6.17” (177.6 mm x 156.6 mm) 30508 st
7.25” x 6.39” (184.2 mm x 162.4 mm) 32102 st
7.50” x 6.61” (190.4 mm x 168.0 mm) 33768 st
7.75” x 6.83” (196.8 mm x 173.6 mm) 35314 st
7.98” x 7.05” (202.8 mm x 179.0 mm) 36650 st
8.24” x 7.28” (209.4 mm x 184.8 mm) 38394 st
8.50” x 7.50” (215.8 mm x 190.4 mm) 40071 st
8.75” x 7.72” (222.2 mm x 196.2 mm) 41651 st
8.98” x 7.93” (228.2 mm x 201.4 mm) 43426 st
9.24” x 8.16” (234.8 mm x 207.2 mm) 45199 st
9.50” x 8.38” (241.2 mm x 212.8 mm) 46864 st
9.75” x 8.61” (247.6 mm x 218.6 mm) 48658 st
9.99” x 8.81” (253.8 mm x 223.8 mm) 50408 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)

Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.
********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************
For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.

In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.