Skeleton Middle Finger machine Embroidery Design Fuck Finger Embroidery Design Middle finger embroidery design Middle finger embroidery #180

*********
This design comes with 25 sizes:
4.00” x 3.71” (101.6 mm x 94.2 mm) 15795 st
4.26” x 3.95” (108.2 mm x 100.4 mm) 17074 st
4.51” x 4.17” (114.6 mm x 106.0 mm) 18303 st
4.76” x 4.41” (121.0 mm x 112.0 mm) 19537 st
5.00” x 4.64” (127.0 mm x 117.8 mm) 20954 st
5.26” x 4.87” (133.6 mm x 123.8 mm) 22317 st
5.51” x 5.12” (140.0 mm x 130.0 mm) 23854 st
5.76” x 5.35” (146.4 mm x 136.0 mm) 25343 st
6.00” x 5.56” (152.4 mm x 141.2 mm) 26779 st
6.26” x 5.82” (159.0 mm x 147.8 mm) 28114 st
6.51” x 6.06” (165.4 mm x 153.8 mm) 29741 st
6.76” x 6.28” (171.7 mm x 159.4 mm) 31325 st
7.00” x 6.50” (177.8 mm x 165.0 mm) 32791 st
7.26” x 6.74” (184.4 mm x 171.3 mm) 34351 st
7.51” x 6.98” (190.8 mm x 177.2 mm) 36001 st
7.76” x 7.21” (197.0 mm x 183.2 mm) 37574 st
8.00” x 7.43” (203.2 mm x 188.8 mm) 39397 st
8.26” x 7.68” (209.8 mm x 195.0 mm) 41101 st
8.51” x 7.90” (216.2 mm x 200.6 mm) 42871 st
8.76” x 8.14” (222.4 mm x 206.8 mm) 44674 st
9.00” x 8.35” (228.6 mm x 212.2 mm) 46251 st
9.26” x 8.60” (235.2 mm x 218.4 mm) 48358 st
9.51” x 8.83” (241.6 mm x 224.4 mm) 50202 st
9.76” x 9.08” (247.8 mm x 230.6 mm) 52171 st
9.99” x 9.29” (253.8 mm x 236.0 mm) 54015 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)

Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************

For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.
In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.