1 of 14
2 of 14
3 of 14
4 of 14
5 of 14
6 of 14
7 of 14
8 of 14
9 of 14
10 of 14
11 of 14
12 of 14
13 of 14
14 of 14
STL for Tobacco Pipe Mold with a Skull. Finished pipe is 12 cm
$55.00
& Instant Download
Payment Methods:
About this item
A complete set of STL files for creating a mold to make ceramic pipes yourself.
This is not a physical product. You will receive my STL files.
This is a mold for creating ceramic smoking pipes from a clay.
There is a skull relief on the surface of its bowl.
If you do not need a relief, you can look at my other mold.
The dimensions of the smoking pipe blank are 120*40*28 mm,
the internal diameter of the chamber is 18 mm.
In the archive of files for making molds, I place two variants of sets. The first one is that each half of the mold consists of two parts, for ease of production on machines with a small table. I have a small 3D printer, so I print the left and right half of the mold in parts. The second option is complete assembly of the mold halves for machines with a large table. A large mold does not fit on my table))
This is not a physical product. You will receive my STL files.
This is a mold for creating ceramic smoking pipes from a clay.
There is a skull relief on the surface of its bowl.
If you do not need a relief, you can look at my other mold.
The dimensions of the smoking pipe blank are 120*40*28 mm,
the internal diameter of the chamber is 18 mm.
In the archive of files for making molds, I place two variants of sets. The first one is that each half of the mold consists of two parts, for ease of production on machines with a small table. I have a small 3D printer, so I print the left and right half of the mold in parts. The second option is complete assembly of the mold halves for machines with a large table. A large mold does not fit on my table))
Listed on 15 July, 2024