About this item
Girl Silhouette embroidery design
- 2.50" X 1.82” (63.50 X 46.23 mm)
- 3.00" X 2.18” (76.20 X 55.37 mm)
- 3.50" X 2.54” (88.90 X 64.52 mm)
- 4.00" X 2.91” (101.60 X 73.91 mm)
- 4.50" X 3.27” (114.30 X 83.06 mm)
- 5.00" X 3.63” (127.00 X 92.20 mm)
- 5.50" X 3.99” (139.70 X 101.35 mm)
- 6.00" X 4.35” (152.40 X 110.49 mm)
- 6.50" X 4.72” (165.10 X 119.89 mm)
- 7.00" X 5.08” (177.80 X 129.03 mm)
The following 8 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
* VP3 - (Husqvarna,Viking)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need
an embroidery machine to stitch these designs out.
**************************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your
computer to the machine to use this file. This listing is for the machine file only - not a finished
item.
******************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the
project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as Tshirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and
tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the
fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent
needle holes as well.
Girl Silhouette embroidery design
- 2.50" X 1.82” (63.50 X 46.23 mm)
- 3.00" X 2.18” (76.20 X 55.37 mm)
- 3.50" X 2.54” (88.90 X 64.52 mm)
- 4.00" X 2.91” (101.60 X 73.91 mm)
- 4.50" X 3.27” (114.30 X 83.06 mm)
- 5.00" X 3.63” (127.00 X 92.20 mm)
- 5.50" X 3.99” (139.70 X 101.35 mm)
- 6.00" X 4.35” (152.40 X 110.49 mm)
- 6.50" X 4.72” (165.10 X 119.89 mm)
- 7.00" X 5.08” (177.80 X 129.03 mm)
The following 8 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
* VP3 - (Husqvarna,Viking)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need
an embroidery machine to stitch these designs out.
**************************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your
computer to the machine to use this file. This listing is for the machine file only - not a finished
item.
******************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the
project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as Tshirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and
tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the
fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent
needle holes as well.
Delivery & Return Policy
But please contact me if you have problems with your order.
Amigo Art
Girl Silhouette embroidery design
- 2.50" X 1.82” (63.50 X 46.23 mm)
- 3.00" X 2.18” (76.20 X 55.37 mm)
- 3.50" X 2.54” (88.90 X 64.52 mm)
- 4.00" X 2.91” (101.60 X 73.91 mm)
- 4.50" X 3.27” (114.30 X 83.06 mm)
- 5.00" X 3.63” (127.00 X 92.20 mm)
- 5.50" X 3.99” (139.70 X 101.35 mm)
- 6.00" X 4.35” (152.40 X 110.49 mm)
- 6.50" X 4.72” (165.10 X 119.89 mm)
- 7.00" X 5.08” (177.80 X 129.03 mm)
The following 8 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
* VP3 - (Husqvarna,Viking)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need
an embroidery machine to stitch these designs out.
**************************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your
computer to the machine to use this file. This listing is for the machine file only - not a finished
item.
******************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the
project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as Tshirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and
tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the
fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent
needle holes as well.
Girl Silhouette embroidery design
- 2.50" X 1.82” (63.50 X 46.23 mm)
- 3.00" X 2.18” (76.20 X 55.37 mm)
- 3.50" X 2.54” (88.90 X 64.52 mm)
- 4.00" X 2.91” (101.60 X 73.91 mm)
- 4.50" X 3.27” (114.30 X 83.06 mm)
- 5.00" X 3.63” (127.00 X 92.20 mm)
- 5.50" X 3.99” (139.70 X 101.35 mm)
- 6.00" X 4.35” (152.40 X 110.49 mm)
- 6.50" X 4.72” (165.10 X 119.89 mm)
- 7.00" X 5.08” (177.80 X 129.03 mm)
The following 8 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
* VP3 - (Husqvarna,Viking)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need
an embroidery machine to stitch these designs out.
**************************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your
computer to the machine to use this file. This listing is for the machine file only - not a finished
item.
******************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the
project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as Tshirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and
tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the
fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent
needle holes as well.