Caliper grease MC 1600 High temperature lubricant for automotive brake systems VMPAUTO 50g
Quantity
Caliper grease MC 1600 High temperature lubricant for automotive brake systems VMPAUTO 50g
Provides mobility of caliper parts Uniform pad wear reduces braking distance
Maximum Reliability
MC 1600 grease was developed in cooperation with VBP caliper service and tuning center. Tested by the champion team of St. Petersburg in circuit racing.
Seals
Seals the gap between the piston and the wall, preventing fluid leakage. Protects against corrosion.
Anti-creak
Get rid of the squeak - apply lubricant to the back of the pads, the ends and the anti-squeak plate.
Enough for all the details
A low flow will allow a small amount of grease to process all the calipers.
Increases security
Increases the efficiency of the brake system, ensures uniform wear of the pads.
Application
INSTRUCTIONS FOR USE:
Do not use with brake fluid grade DOT 5.0
The grease will last until the next pad replacement.
When changing pads, lubricate:
1. Non-working and end surfaces of pads
Applying MC 1600 to the non-working sides of the pads prevents brake squeal. It is applied in a thin layer on a previously cleaned surface and its end parts.
Attention: Do not use on working surfaces of brake pads and brake discs!
2. Guides
The treatment of the rails protects against corrosion, prevents jamming and facilitates assembly and disassembly. .
Grease MC1600 is a professional tool,
requiring compliance with the rules of use: applied in a thin layer on clean surfaces.
3. Piston
Piston treatment protects against corrosion and prevents jamming of parts of the brake system. Lubricant is applied to the top of the piston under the cuff using a medical syringe.
CONSUMPTION 5 g MC 1600 is sufficient for one set of pads.
APPLICATION ITEMS:
- caliper guides (layer thickness -0.1mm)
- non-working surfaces and ends of brake pads
-piston surface (layer thickness -0.1mm)
-elastomeric caliper cuffs (!)
- Exhaust system connectors exposed to high temperatures