Corner connector of bass traps Cube Acoustic Foam for rec.studio | ceiling Bass Trap

Introducing "Cube," a corner connector for bass traps designed to be mounted in the corners of room intersections, particularly where walls meet the ceiling.

These bass traps effectively capture the random 'omni-directional' bass energy that accumulates in corners, preventing it from dominating the room. By reducing smear and enhancing bass definition and punch, "Cube" aids in controlling low-frequency energy, resulting in a tighter, more controlled bass output, which is especially beneficial for studio environments.

Acoustic engineers consistently prioritize treating corner areas in room acoustics, as they are key sites for sound accumulation. "Cube" traps significantly reduce natural reverberation time, particularly impacting low-frequency resonances, even in rooms lacking other sound-absorbing surfaces.

Specifications:
• Dimensions: 250*250*250 mm / 9.85*9.85*9.85 inches; or 160*160*160 mm / 6.3*6.3*6.3 inches;
• Material: Open cell polyurethane foam
• Density: 1.8 lb/ft3 (30 kg/m3)
• Noise Reduction Coefficient (NRC) range: Approximately 0.8 — 0.94
• Permanent Deformation: Up to 3.6% (After 22 hours, 50% compression at 158 °F)
• Tensile Strength: Starting from 90 kPa
• Minimum Elongation at Break: 120%
• Temperature Resistance: Approximately 122 °F
• CIELAB Chromatic Error Range: Delta E ≤ 5

Installation:
The installation process involves using continuous sheets of "Double Sided Adhesive Tape" or glue applied onto an acrylic base.