Wynns Cooling System Flush W45944 325ml

Wynns Cooling System Flush W45944 325ml

COMPATIBILITY
Engine Petrol and petrol hybrid. Diesel and diesel hybrid

Shake the bottle well and add contents to the cooling system via the expansion tank
if part of the system circuit (2 hoses: out and return), or directly into the radiator if
a single hose overflow tank is fitted.
For higher performance, first replace the old coolant by water, then add Wynn's
Cooling System Flush.
Warm up the engine with the heater control in HOT position.
Let the engine run at idle for 10 minutes. Heater still in "hot" position.
Stop the engine and allow to cool, open drain valve and empty the system.
With system still open, flush with water until clear, close system and refill with
coolant.
Contents of one bottle of 325 ml treats systems with capacity up to 12 litres.
Add Wynn's Cooling System Stop Leak as a leak preventive agent.