Skeleton rock fist Embroidery Design rock on Embroidery Design Skeleton FIST OF ROCK machine embroidery design Rock and

Skeleton rock fist Embroidery Design rock on Embroidery Design Skeleton FIST OF ROCK machine embroidery design Rock and Roll embroidery #455
*********
This design comes with 21 sizes:
3.62” x 6.98” (92.0 mm x 177.2 mm) 12863 st
3.50” x 6.74” (88.8 mm x 171.2 mm) 12091 st
3.37” x 6.49” (85.6 mm x 164.8 mm) 11451 st
3.24” x 6.24” (82.2 mm x 158.4 mm) 10832 st
3.10” x 5.98” (78.8 mm x 152.0 mm) 10101 st
2.98” x 5.74” (75.8 mm x 145.8 mm) 9535 st
2.85’” x 5.50” (72.4 mm x 139.6 mm) 8800 st
2.72” x 5.24” (69.2 mm x 133.1 mm) 8230 st
2.59” x 4.98” (65.8 mm x 126.4 mm) 7628 st
2.46” x 4.74” (62.6 mm x 120.4 mm) 7147 st
2.34” x 4.49” (59.4 mm x 114.0 mm) 6629 st
2.20” x 4.24” (56.0 mm x 107.6 mm) 6137 st
2.07” x 3.98” (52.6 mm x 101.2 mm) 5568 st
1.95” x 3.74” (49.6 mm x 95.0 mm) 5096 st
1.82” x 3.49” (46.2 mm x 88.6 mm) 4641 st
1.69” x 3.24” (43.0 mm x 82.4 mm) 4189 st
1.56” x 2.98” (39.6 mm x 75.6 mm) 3772 st
1.43” x 2.74” (36.4 mm x 69.6 mm) 3404 st
1.31” x 2.50” (33.2 mm x 63.4 mm) 3012 st
1.17” x 2.24” (29.8 mm x 56.8 mm) 2672 st
1.05” x 1.98” (26.6 mm x 50.4 mm) 2320 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)

Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.
********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************
For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.

In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.