Cow Skull Head machine embroidery Skull embroidery design skeleton embroidery design bull Skull 439

Cow Skull Head machine embroidery Skull embroidery design skeleton embroidery design bull Skull embroidery head Design #439
*********
This design comes with 23 sizes:
7.00” x 6.89” (177.7 mm x 174.9 mm) 15190 st
6.76” x 6.65” (171.6 mm x 168.9 mm) 14271 st
6.51” x 6.40” (165.3 mm x 162.6 mm) 13493 st
6.26” x 6.15” (158.9 mm x 156.3 mm) 12647 st
6.00” x 5.89” (152.3 mm x 149.7 mm) 11830 st
5.76” x 5.66” (146.2 mm x 143.7 mm) 11021 st
5.51” x 5.41” (139.9 mm x 137.5 mm) 10449 st
5.26” x 5.17” (133.5 mm x 131.2 mm) 9618 st
5.00” x 4.91” (126.9 mm x 124.7 mm) 8832 st
4.76” x 4.67” (120.8 mm x 118.7 mm) 8217 st
4.50” x 4.43” (114.4 mm x 112.5 mm) 7667 st
4.26” x 4.18” (108.1 mm x 106.2 mm) 7104 st
4.00” x 3.92” (101.5 mm x 99.6 mm) 6412 st
3.76” x 3.69” (95.4 mm x 93.6 mm) 5884 st
3.50” x 3.44” (89.0 mm x 87.4 mm) 5308 st
3.26” x 3.19” (82.7 mm x 81.1 mm) 4797 st
3.50” x 3.44” (89.0 mm x 87.4 mm) 5308 st
3.26” x 3.19” (82.7 mm x 81.1 mm) 4797 st
3.00” x 2.94” (76.1 mm x 74.6 mm) 4327 st
2.76” x 2.70” (70.0 mm x 68.5 mm) 3901 st
2.50” x 2.45” (43.6 mm x 62.3 mm) 3407 st
2.26” x 2.21” (57.3 mm x 56.1 mm) 2984 st
2.00” x 1.95” (50.7 mm x 49.5 mm) 2521 st
1.75” x 1.71” (44.5 mm x 43.5 mm) 2173 st
1.52” x 1.48” (38.7 mm x 37.7 mm) 1821 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)


Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************
For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.

In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.