FSL Heart machine embroidery Heart Free standing lace embroidery design 407
$2.99
& Instant Download
Payment Methods:
About this item
FSL Heart machine embroidery Heart Free standing lace em407broidery design heart Design Embroidery FSL #407
*********
This design comes with 13 sizes:
6.24” x 5.02” (158.6 mm x 127.4 mm) 20121 st
5.94” x 4.76” (150.8 mm x 121.0 mm) 18843 st
5.62” x 4.51” (142.8 mm x 114.6 mm) 17548 st
5.31” x 4.26” (134.8 mm x 108.2 mm) 16330 st
5.00” x 4.02” (127.0 mm x 102.0 mm) 15325 st
4.69” x 3.76” (119.0 mm x 95.6 mm) 14227 st
4.38” x 3.51” (111.2 mm x 89.2 mm) 12801 st
4.06” x 3.26” (103.2 mm x 82.8 mm) 11714 st
3.76” x 3.02” (95.4 mm x 76.6 mm) 10528 st
3.44” x 2.76” (87.4 mm x 70.2 mm) 9471 st
3.13” x 2.52” (79.6 mm x 63.9 mm) 8621 st
2.82” x 2.27” (71.6 mm x 57.6 mm) 7632 st
2.50” x 2.02” (63.6 mm x 51.2 mm) 6905 st
The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
*************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.
***********************************************************************************
Used with water soluble stabilizer.
Freestanding lace! Adorable design is stitched onto a wash away stabilizer
When sewing out FSL use the same color bobbin thread as the top thread. For free standing lace hoop one or two layers of fiber water soluble stabilizers making sure it’s taut in the hoop and embroider the design onto the stabilizer. No fabric - just stabilizer!
Keep it in the water bath for about 10 minutes then remove it from the warm water and place the design onto a dry flat surface until the thread has thoroughly dried.
*********
This design comes with 13 sizes:
6.24” x 5.02” (158.6 mm x 127.4 mm) 20121 st
5.94” x 4.76” (150.8 mm x 121.0 mm) 18843 st
5.62” x 4.51” (142.8 mm x 114.6 mm) 17548 st
5.31” x 4.26” (134.8 mm x 108.2 mm) 16330 st
5.00” x 4.02” (127.0 mm x 102.0 mm) 15325 st
4.69” x 3.76” (119.0 mm x 95.6 mm) 14227 st
4.38” x 3.51” (111.2 mm x 89.2 mm) 12801 st
4.06” x 3.26” (103.2 mm x 82.8 mm) 11714 st
3.76” x 3.02” (95.4 mm x 76.6 mm) 10528 st
3.44” x 2.76” (87.4 mm x 70.2 mm) 9471 st
3.13” x 2.52” (79.6 mm x 63.9 mm) 8621 st
2.82” x 2.27” (71.6 mm x 57.6 mm) 7632 st
2.50” x 2.02” (63.6 mm x 51.2 mm) 6905 st
The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
*************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.
***********************************************************************************
Used with water soluble stabilizer.
Freestanding lace! Adorable design is stitched onto a wash away stabilizer
When sewing out FSL use the same color bobbin thread as the top thread. For free standing lace hoop one or two layers of fiber water soluble stabilizers making sure it’s taut in the hoop and embroider the design onto the stabilizer. No fabric - just stabilizer!
Keep it in the water bath for about 10 minutes then remove it from the warm water and place the design onto a dry flat surface until the thread has thoroughly dried.