Bear machine Embroidery design BEAR Silhouette Embroidery design grizzly Embroidery design grizzly mini Embroidery grizzly #145

*********
This design comes with 25 sizes :
6.99” x 4.94” (177.6 mm x 125.6 mm) 26505 st
6.76” x 4.78” (171.6 mm x 121.4 mm) 24843 st
6.50” x 4.61” (165.2 mm x 117.0 mm 23189 st
6.26” x 4.42” (159.0 mm x 112.2 mm) 21519 st
6.00” x 4.23” (152.4 mm x 107.4 mm) 19932 st
5.76” x 4.06” (146.2 mm x 103.2 mm) 18429 st
5.50” x 3.89” (139.8 mm x 98.8 mm) 16934 st
5.26” x 3.72” (133.6 mm x 94.4 mm) 15590 st
5.00” x 3.52” (127.0 mm x 89.4 mm) 14203 st
4.76” x 3.35” (120.8 mm x 85.2 mm) 13067 st
4.51” x 3.17” (114.5 mm x 80.6 mm) 11795 st
4.26” x 3.00” (108.2 mm x 76.2 mm) 10656 st
4.00” x 2.82” (101.6 mm x 71.6 mm) 9497 st
3.76” x 2.65” (95.4 mm x 67.2 mm) 8488 st
3.51” x 2.46” (89.2 mm x 62.6 mm) 7585 st
3.26” x 2.28” (82.8 mm x 58.0 mm) 6487 st
3.00” x 2.10” (76.2 mm x 53.4 mm) 5668 st
2.76” x 1.94” (70.0 mm x 49.2 mm) 4859 st
2.51” x 1.76” (63.8 mm x 44.6 mm) 4163 st
2.26” x 1.57” (57.4 mm x 40.0 mm) 3491 st
2.00” x 1.39” (50.8 mm x 35.2 mm) 2838 st
1.76” x 1.22” (44.6 mm x 31.0 mm) 2326 st
1.51” x 1.05” (38.4 mm x 26.6 mm) 1831 st
1.28” x 0.87” (32.6 mm x 22.2 mm) 1397 st
1.03” x 0.70” (26.2 mm x 17.8 mm) 993 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)


Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************

For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.
In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.