DIY Paper Number 2024 3D Papercraft Printable PDF

Digital pdf template of Number 2024 height 50 cm for paper or cardboard assembly. The digital PDF template is ready for printing. The instruction in the file is attached. To assemble the model, you need to print this file on A4/Letter paper or cardboard.

Three numbers to download: 2, 0 and 4.

DIFFICULTY: easy, for beginners

PARTS: 27+ 32 +27 + 26 = 112 total

SHEETS(A4/Letter): To assembly the number 2024 with a height of 50 cm, you will need 15 + 17 +15 + 17 = 64 sheets

PRINT: for colored paper

FINISHED model size:

Two: Height – 50 cm/ 19,7", Width – 35,1 cm/ 13,8", Depth – 10 cm/ 3,9".

Zero: Height – 50 cm/ 19,7", Width – 39,4 cm/ 15,5", Depth – 10 cm/ 3,9".

Four: Height – 50 cm/ 19,7", Width – 44,3 cm/ 17,4", Depth – 10 cm/ 3,9".

There are two ways to reduce the size of numbers when printing:

1) Decrease the percentage from 100% to what you need.

2) Choose to print two pages on one page – then you will get half the size of the figure: 25 cm. You can choose to print four, six, and so on pages on one page.

To increase the model:

1) Print the template in A3 (140%), A2 (200%), A1 (280%), and A0 (400%) format. A4 format is the default size of 100%. 

DOWNLOADABLE content:

1) 3 PDF manuals and 3 PDF templates in one zip file.

Materials required for assembly:

1. Printer.

2. Paper sheets of A4 or US letter (paper density 160-240 g/m2).

3. Scissors or a craft knife.

4. Ruler.

5. Inkless pen or awl, or use the blunt side of a craft knife.

6. Glue stick, PVA, or similar product.