DIY Paper Number Zero 3D Papercraft Printable PDF

Digital pdf template of Number Zero height 50 cm for paper or cardboard assembly. The digital PDF template is ready for printing. The instruction in the file is attached. To assemble the model, you need to print this file on A4/Letter paper or cardboard.

DIFFICULTY: easy, for beginners

PARTS: 32

SHEETS(A4/Letter): 17

PRINT: for colored paper

FINISHED model size: Height – 50 cm/ 19,7", Width – 39,4 cm/ 15,5", Depth – 10 cm/ 3,9".

There are two ways to reduce the size of numbers when printing:

1) Decrease the percentage from 100% to what you need.

2) Choose to print two pages on one page – then you will get half the size of the figure: 25 cm. You can choose to print four, six, and so on pages on one page.

To increase the number:

1) Print the template in A3 (140%), A2 (200%), A1 (280%), and A0 (400%) format. A4 format is the default size of 100%. 

DOWNLOADABLE content:

1) Manual with the location of parts (PDF, 2 pages). There is also a universal manual at the link.

2) Template of Number Zero (PDF, 17 pages).

Materials required for assembly:

1. Printer.

2. Paper sheets of A4 or US letter (paper density 160-240 g/m2).

3. Scissors or a craft knife.

4. Ruler.

5. Inkless pen or awl, or use the blunt side of a craft knife.

6. Glue stick, PVA, or similar product.