Price Tag Applique Machine Embroidery design
Price Tag Applique Machine Embroidery design
This design comes with 31 sizes (height):
5.69” x 9.99” 6365 st
1.46” x 2.50” 1632 st
1.61” x 2.76” 1783 st
1.75” x 2.99” 1941 st
1.89” x 3.25” 2107 st
2.02” x 3.50” 2255 st
2.17” x 3.76” 2414 st
2.31” x 4.00” 2563 st
2.45” x 4.24” 2714 st
2.60” x 4.50” 2873 st
2.73” x 4.74” 3029 st
2.87” x 4.99” 3189 st
3.02” x 5.25” 3352 st
3.17” x 5.50” 3504 st
3.30” x 5.74” 3644 st
3.43” x 5.98” 3813 st
3.58” x 6.25” 3977 st
3.72” x 6.50” 4133 st
3.87” x 6.75” 4283 st
4.00” x 6.99” 4446 st
4.14” x 7.25” 4604 st
4.28” x 7.50” 4759 st
4.43” x 7.75” 4918 st
4.56” x 7.99” 5071 st
4.71” x 8.25” 5234 st
4.84” x 8.50” 5393 st
4.98” x 8.75” 5559 st
5.12” x 8.98” 5712 st
5.26” x 9.24” 5867 st
5.41” x 9.50” 6021 st
5.55” x 9.74” 6023 st
The following 7 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
* VP3 - (Husqvarna,Viking)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
****************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.
*****************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.
