Sea Turtle embroidery Design Preppy Turtle machine embroidery Beach embroidery Sea Turtle Summer embroidery baby embroidery sea #119

This design comes with 25 sizes:
1.99” x 1.91” (50.6 mm x 48.4 mm) 3197 st
2.24” x 2.14” (57.0 mm x 54.4 mm) 3511 st
2.50” x 2.38” (63.4 mm x 60.4 mm) 3812 st
2.75” x 2.61” (69.8 mm x 66.4 mm) 4052 st
3.00” x 2.86” (76.2 mm x 72.6 mm) 4341 st
3.24” x 3.09” (82.4 mm x 78.6 mm) 4575 st
3.50” x 3.33” (88.8 mm x 84.6 mm) 4832 st
3.75” x 3.57” (95.2 mm x 90.6 mm) 5066 st
4.00” x 3.81” (101.6 mm x 96.8 mm) 5283 st
4.24” x 4.05” (107.8 mm x 102.8 mm) 5534 st
4.50” x 4.28” (114.2 mm x 108.8 mm) 5738 st
4.75” x 4.52” (120.6 mm x 114.8 mm) 5967 st
5.00” x 4.76” (127.0 mm x 121.0 mm) 6154 st
5.24” x 5.00” (133.2 mm x 127.0 mm) 6363 st
5.50” x 5.24” (139.6 mm x 133.0 mm) 6565 st
5.75” x 5.47” (146.0 mm x 139.0 mm) 6779 st
6.00” x 5.71” (152.4 mm x 145.0 mm) 6965 st
6.25” x 5.95” (158.8 mm x 151.2 mm) 7185 st
6.50” x 6.19” (165.0 mm x 157.2 mm) 7378 st
6.75” x 6.43” (171.4 mm x 163.2 mm) 7563 st
7.00” x 6.66” (177.8 mm x 169.2 mm) 7732 st
7.24” x 6.91” (184.0 mm x 175.4 mm) 7923 st
7.50” x 7.14” (190.4 mm x 181.4 mm) 8110 st
7.75” x 7.38” (196.8 mm x 187.4 mm) 8296 st
8.00” x 7.61” (203.2 mm x 193.4 mm) 8450 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)

Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************

For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.
In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.