Skull Head santa hat machine embroidery design Santa Skull embroidery design skeleton embroidery design Skull Fill Desig

Skull Head santa hat machine embroidery design Santa Skull embroidery design skeleton embroidery design Skull Fill Design Skeleton #135

*********
This design comes with 21 sizes:
2.30” x 2.97” (58.3 mm x 75.4 mm) 9670 st
2.50” x 3.22” (63.4 mm x 81.8 mm) 10848 st
2.69” x 3.47” (68.2 mm x 88.1 mm) 11860 st
2.88” x 3.71” (73.1 mm x 94.3 mm) 13152 st
3.06” x 3.96” (77.7 mm x 100.6 mm) 14199 st
3.26” x 4.22” (82.8 mm x 107.1 mm) 15455 st
3.45” x 4.47” (87.6 mm x 113.6 mm) 16776 st
3.64” x 4.72” (92.5 mm x 120.0 mm) 18072 st
3.82” x 4.96” (97.1 mm x 126.1 mm) 19383 st
4.02” x 5.22” (102.2 mm x 132.5 mm) 20871 st
4.22” x 5.46” (107.1 mm x 138.8 mm) 22545 st
4.41” x 5.71” (111.9 mm x 145.1 mm) 24033 st
4.59” x 5.96” (116.5 mm x 151.4 mm) 25494 st
4.79” x 6.22” (121.6 mm x 158.0 mm) 27122 st
4.98” x 6.47” (126.4 mm x 164.3 mm) 28634 st
5.17” x 6.71” (131.3 mm x 170.5 mm) 30171 st
5.35” x 6.96” (135.9 mm x 176.7 mm) 31713 st
5.55” x 7.22” (140.9 mm x 183.4 mm) 33677 st
5.74” x 7.47” (145.9 mm x 189.7 mm) 35428 st
5.93” x 7.72” (150.7 mm x 196.2 mm) 37252 st
6.11” x 7.96” (155.3 mm x 202.2 mm) 38866 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)

Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************

For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.

In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.