Salamander machine Embroidery design Gecko Embroidery design Salamander Embroidery Gecko silhouette embroidery design Li

Salamander machine Embroidery design Gecko Embroidery design Salamander Embroidery Gecko silhouette embroidery design Lizard silhouette #427
*********
This design comes with 19 sizes:
5.98” x 1.67” (151.8 mm x 42.4 mm) 6417 st
5.72” x 1.59” (145.4 mm x 40.5 mm) 6011 st
5.48” x 1.53” (139.2 mm x 38.8 mm) 5560 st
5.23” x 1.45” (132.8 mm x 36.8 mm) 5169 st
4.98” x 1.39” (126.4 mm x 35.4 mm) 4729 st
4.72” x 1.32” (120.0 mm x 33.6 mm) 4420 st
4.48” x 1.25” (113.8 mm x 31.8 mm) 4079 st
4.22” x 1.17” (107.2 mm x 29.8 mm) 3756 st
3.98” x 1.12” (101.0 mm x 28.4 mm) 3384 st
3.72” x 1.06” (94.6 mm x 26.8 mm) 3123 st
3.48” x 0.97” (88.4 mm x 24.6 mm) 2887 st
3.23” x 0.91” (82.0 mm x 23.0 mm) 2566 st
2.98” x 0.83” (75.6 mm x 21.0 mm) 2242 st
2.73” x 0.78” (69.4 mm x 19.8 mm) 1998 st
2.47” x 0.71” (62.8 mm x 18.0 mm) 1746 st
2.23” x 0.62” (56.6 mm x 15.8 mm) 1542 st
1.98” x 0.55” (50.2 mm x 14.0 mm) 1356 st
1.73” x 0.49” (44.0 mm x 12.4 mm) 1126 st
1.47” x 0.43” (37.4 mm x 11.0 mm) 934 st

The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)

Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************

For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.


In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.