3D STL BOW-WEAPON (CROSSBOW) FOR HUMANIZING THE POKEMON CHARACTER " HYDREIGON" cosplay anime
DIGITAL!
Bow (Crossbow) for humanizing the pokemon character "Hydreigon"
Product length 160 cm. Also, you can change the size of the bow by zooming in on the details
There are only 16 parts in the archive, 13 of which are repeated twice when printing ( the upper and lower parts are symmetrical in the weapon)
Each detail does not exceed 19x19cm, so that it can be printed on a small 3D printer.
The largest part with a gear -18x19cm
For ease of attachment, holes are made inside, the parts can be connected with magnets so that you can transport the weapon in disassembled form. But I recommend bolting the parts, as the construction will be stronger. Another Alternative is to make through holes and insert a rigid wire or pipe.
if you have any questions, you can ask them lady,[email protected]
I wish you good luck in creating !
STL FORMAT!
3D PRINTING SETTINGS
I recommend the following print settings :
Pla t = 200/60
Layer Height - 0.3
wall thickness 1.2
print speed 45 mm/s
10% infill
my printer anycubic i3 mega
support required
time printing ( all details) - 80h ( 1,7kg)
