Kubota B2650HSDC, B3350HSDC Workshop Service Manual
Kubota B2650HSDC, B3350HSDC Workshop Service Manual
Kubota B2650HSDC, B3350HSDC Workshop Service Manual
Kubota Tractor Model B2650HSDC, B3350HSDC
Publication: 9Y777-08220
Format: PDF
Language: English
Kubota B2650HSDC, B3350HSDC Tractor Workshop Manual – 470 Pages
Kubota B2650HSDC, B3350HSDC Tractor Operators Manual – 110 Pages
Table of Content of the Workshop Service Manual
This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the B2650HSDC and B3350HSDC. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
– Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specifications
• Dimensions
– General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
– Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / tractor mechanism that this workshop manual does not include.
– Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING
a Operate the Kubota B2650HSDC, B3350HSDC Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.
c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor B2650HSDC, B3350HSDC Operators Manual)
1) Park the machine on a level ground.
2) Make sure the hydraulic oil temperature is in the range of 10-30C (50-86F) and see if the oil level is within the specified zone of the oil level gauge.
3) Keep the machine front as shown as following posture.