Letter F Monogram Embroidery Floral F monogram Fancy Vine Monogram Embroidery floral monogram embroidery fancy letter F Capital letter F #08
***********************
Not whole alphabet!!!
***************************
This design comes with 29 sizes (height) :
9.05” x 10.00” (229.8 mm x 254.0 mm) 30477 st
8.83” x 9.76” (224.4 mm x 248.0 mm) 29619 st
8.61” x 9.51” (218.6 mm x 241.6 mm) 28651 st
8.38” x 9.26” (212.8 mm x 235.2 mm) 27795 st
8.14” x 9.00” (206.8 mm x 228.6 mm) 26834 st
7.93” x 8.76” (201.4 mm x 222.6 mm) 26046 st
7.70” x 8.51” (195.6 mm x 216.2 mm) 25238 st
7.47” x 8.26” (189.8 mm x 209.8 mm) 24417 st
7.24” x 8.00” (183.8 mm x 203.2 mm) 23554 st
7.02” x 7.76” (178.2 mm x 197.2 mm) 22768 st
6.79” x 7.51” (172.4 mm x 190.8 mm) 21994 st
6.57” x 7.26” (166.8 mm x 184.4 mm) 21166 st
6.33” x 7.00” (160.8 mm x 177.8 mm) 24402 st
6.11” x 6.76” (155.2 mm x 171.8 mm) 19698 st
5.88” x 6.51” (149.4 mm x 165.4 mm) 18905 st
5.65” x 6.26” (143.6 mm x 159.0 mm) 18166 st
5.42” x 6.00” (137.6 mm x 152.4 mm) 17426 st
5.20” x 5.76” (132.2 mm x 146.4 mm) 16751 st
4.98” x 5.51” (126.4 mm x 140.0 mm) 16066 st
4.75” x 5.26” (120.6 mm x 133.6 mm) 15334 st
4.51” x 5.00” (114.6 mm x 127.0 mm) 14620 st
4.29” x 4.76” (109.0 mm x 121.0 mm) 13933 st
4.07” x 4.51” (103.4 mm x 114.6 mm) 13250 st
3.84” x 4.26” (97.6 mm x 108.2 mm) 12510 st
3.61” x 4.00” (91.6 mm x 101.6 mm) 11776 st
3.39” x 3.76” (86.0 mm x 95.6 mm) 11154 st
3.16” x 3.51” (80.2 mm x 89.2 mm) 10398 st
2.93” x 3.26” (74.4 mm x 82.8 mm) 9693 st
2.69” x 3.00” (68.4 mm x 76.2 mm) 8996 st

The following 9 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
*VP3 - (Husqvarna,Viking)
*VIP
*

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
*********************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.
*******************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.