Mini Nurse Cap Machine Embroidery design Nurse Hat Cap Embroidery Design Medical Nurse Hat Cap Embroidery Design 451

Mini Nurse Cap Machine Embroidery design Nurse Hat Cap Embroidery Design Medical Nurse Hat Cap Embroidery Design #451
*********
This design comes with 9 sizes:
3.00” x 1.27” (76.2 mm x 32.2 mm) 4766 st
2.75” x 1.17” (69.8 mm x 29.6 mm) 4138 st
2.50” x 1.06” (63.4 mm x 27.0 mm) 3487 st
2.24” x 0.96” (57.0 mm x 24.4 mm) 2916 st
2.00” x 0.86” (50.8 mm x 21.8 mm) 2368 st
1.75” x 0.76” (44.4 mm x 19.2 mm) 1901 st
1.50” x 0.65” (38.0 mm x 16.4 mm) 1507 st
1.24” x 0.54” (31.6 mm x 13.8 mm) 1130 st
1.00” x 0.44” (25.4 mm x 11.2 mm) 823 st


The following 9 formats are included in the file you will receive:
* PES - (Brother, Deco, Babylock)
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome, Elna, Kenmore)
*VP3 - (Husqvarna, Viking)
*VIP
*
* SEW - (Janome, Elna, Kenmore)


Please note that this is not a physical item or patch. This is an embroidery design. You definitely need an embroidery machine to embroider these patterns.

********************************************************
This list is intended only for the machine file, not for finished products.

To use these files, you must have an embroidery machine and the software necessary to transfer it from your computer to the machine.
********************************************************

For high-quality stitching, I recommend using a suitable stabilizer and a needle size for the fabric.

In particular, when working with fine-knit fabrics, such as T-shirts and children's overalls, it is better to use a sticky stabilizer on the back of the fabric with a stabilizer of stitches and tears on top inside the fabric, and a stabilizer of flushing on the outside of the fabric, especially when stitching fonts or fine lines. A thinner gauge knitting needle can also prevent holes from appearing in the needle.